Z6_EL9QHKG10GPM20IJGE61AK10O0

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

Z7_P86CH0O0I0RF10IB06HRVQ0087

Z7_EL9QHKG10GPM20IJGE61AK10S6

0 Items

Z7_EL9QHKG10GPM20IJGE61AK10S5

Home > Resins, Polyester & Vinylester & Epoxy > Penetrating Epoxy_1Gl Kt

Penetrating Epoxy_1Gl Kt 1:1 A&B Epoxy Kit

Item #: 137877

82.38

Each

Quantity:

Our 1 to 1 Penetrating system is a two part epoxy resin system designed for the restoration of dry or rotten wood or other porous substrates. This system contains a small portion of non-hazardous solvent which allows the epoxy to be carried into the substrate where it cures to a hard, rigid condition which can then be painted or varnished with very little surface preparation. This material has a forgiving, easy to use 1 to 1 mix ratio. The material itself features easy wet out, long pot life and good adhesion to a wide variety of materials, including wood, glass, metals and most other plastics. This material may be further thinned with appropriate solvents such as Xylene or Toluene for increased substrate penetration.

As with all adhesive-type compounds, proper surface preparation is essential for good bond strength. Additionally, recoating of this material should be accomplished before the material is thoroughly cured; generally in less than 24 hours. If the material has cured hard and tack-free, a light sanding and solvent wash may be necessary before recoating.

This material is flammable. Avoid exposure to open flames, sparks and other sources of ignition.

Ground Shipping Only