Penetrating Epoxy_2Qt Kt 1:1 A&B Epoxy Kit

Our 1 to 1 Penetrating system is a two part epoxy resin system designed for the restoration of dry or rotten wood or other porous substrates. This system contains a small portion of non-hazardous solvent which allows the epoxy to be carried into the substrate where it cures to a hard, rigid condition which can then be painted or varnished with very little surface preparation. This material has a forgiving, easy to use 1 to 1 mix ratio. The material itself features easy wet out, long pot life and good adhesion to a wide variety of materials, including wood, glass, metals and most other plastics. This material may be further thinned with appropriate solvents such as Xylene or Toluene for increased substrate penetration.

As with all adhesive-type compounds, proper surface preparation is essential for good bond strength. Additionally, recoating of this material should be accomplished before the material is thoroughly cured; generally in less than 24 hours. If the material has cured hard and tack-free, a light sanding and solvent wash may be necessary before recoating.

This material is flammable. Avoid exposure to open flames, sparks and other sources of ignition.