Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
S2K Commerce - Products Dropdown
Actions
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Actions
Home
>
Liquid Foam
> Liquid Urethane Foam Kit, 8 Lb Density, Inc. 1 GL. Part A & 1 GL. Part B,
Liquid Urethane Foam Kit, 8 Lb Density, Inc. 1 GL. Part A & 1 GL. Part B,
Item #:
135439
Manufacturer:
FGCI Website
Liquid Urethane Foam Kit, 8 Lb Density, Includes 1 GL. Part A & 1 GL. Part B, Excellent for Flotation, Insulation, and Structural Uses, 2 Gal. of Mixed Liquid Makes 2 Cu Ft of Foam
131.00
Each
Quantity:
Liquid Urethane Foam is a two-component, Isocyanate/Polyol based, pour-in-place, urethane foam system available in three separate density formulations by weight per cubic foot.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
These foams are used for a variety of applications, including:
- Marine floatation
- Art
- Sculpting
- Taxidermy
- Prototyping
- Mold making
- Decorative and architectural millwork pieces
Our 2 Lb. Foam meets USCG Title 33, Chapter 1, Part 183.
In general these foams have:
- Good compressive strength
- Excellent solvent resistance
- Mold and mildew resistance
Maximum service temperature of 180°F.
Directions for General Small Quantity Use:
Step 1: Mix equal parts Base and Activator (1:1 by volume) or mix by weight (approx. 112 parts A-Side: Base to approx. 100 parts of B-Side: Activator).
Step 2: Mixing and metering equipment must accommodate the 1:1 by volume mix ratio.
Step 3: Mix thoroughly using a stir stick or a mechanical mixer. Please refer to Typical Reaction Profiles of Liquid Foam Chart for mix times.
Step 4: Pour immediately after mixing.
Step 5: Allow cooling between pouring.
Directions may vary by application. For technical support and assistance with critical applications or large pours, please feel free to contact Customer Service at 1-800-272-7890.
Liquid Foam
Size
gallon
Density
8 lb
Item#:
128903
Manufacturer:
FGCI Website
