Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_EL9QHKG10GPM20IJGE61AK10S6
0 Items
Z7_EL9QHKG10GPM20IJGE61AK10S5
Home  >  Resins, Polyester & Vinylester & Epoxy  > U300LV Epoxy, 2:1 Ratio, 1-1/2 Pint Kit, Bottles

U300LV Epoxy, 2:1 Ratio, 1-1/2 Pint Kit, Bottles

Item #: 135360 
FGCI U300LV Epoxy Laminating Resin, 2:1, Low Viscosity for Easy Wet-Out,100% Solids, Ideal with Glass, Carbon, & Kevlar for an Exceptionally Strong Composite, Pot Life: 30 Minutes at 77F in 1/2 lb. Mass, Cure 24-48 hours, 1-1/2 Pint Kit
91.40
Each
Quantity:
135360
 Our 300 LV system is a two component 100 % solids epoxy resin system designed for the lamination of glass, carbon, or kevlar fibers as used in the production of composite plastic products. This material features a forgiving and easy to use 2 to 1 by volume mix ratio that is ( 2 Parts Epoxy Resin side to 1 Part of Activator side by volume). The material itself features easy wet out, moderate pot life, and good adhesion to a wide variety of other common materials including wood, glass, metals, cured fiberglass composites, and most other plastics. The material cures to a hard, light colored plastic with good physical properties, and excellent resistance to water, chemicals, and solvents. This material may lightly blush in thin films or high humidity. Cure time for this material may be accelerated by mild heat up to 150 F. As with all adhesive type compounds, proper surface preparation is essential for good bond strength; additionally recoating of this material should be accomplished before the material is thoroughly cured, generally in less than 24 hours. If the material has cured hard or blushed, a light sanding and solvent wash may be necessary before recoating. 

Resins, Polyester & Vinylester & Epoxy

Size
Pint
Brand
Epoxy
Ground Shipping Only