Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_EL9QHKG10GPM20IJGE61AK10S6
Z7_EL9QHKG10GPM20IJGE61AK10S5
Home  >  Resins, Polyester & Vinylester & Epoxy  > Rot-Stop Epoxy_A-S_1Gl Jg

Rot-Stop Epoxy_A-S_1Gl Jg Epoxy Resin

Item #: 134756 
177.92
Each
Quantity:
134756
 Our Rot Stop material is a special 100 % solids, low modulus, moisture insensitive epoxy

system, that does not cure rigid hard, and will allow for the temperature driven expansion stresses

involved in most construction applications. The material features an easy to use 1 to 1 by volume mix ratio and excellent adhesion to most construction materials. This material is most useful for the rehabilitation of dry rotted wood and will in most cases restore it to a normal hardness and stop

further degradation of it.

With the proper loading of clean sand aggregate the material can make an excellent concrete

 patching compound as well As with all adhesive type compounds proper surface preparation is essential for good bond strength, additionally recoating of this material should be accomplished before the material is  thoroughly cured generally in less then 24 hours. If the material has cured hard and tack free a light sanding and solvent wash may be necessary before recoating.