Z6_EL9QHKG10GPM20IJGE61AK10O0

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

Z7_P86CH0O0I0RF10IB06HRVQ0087

Z7_EL9QHKG10GPM20IJGE61AK10S6

0 Items

Z7_EL9QHKG10GPM20IJGE61AK10S5

Home > Resins, Polyester & Vinylester & Epoxy > Clear Casting Polyester Resin, 1 GL. MEKP sold separately

Clear Casting Polyester Resin, 1 GL. MEKP sold separately

Item #: 128748

Clear Casting Polyester Resin, 1 GL. A resin used for casting applications. Pre-promoted for ambient temperature cure. Low viscosity. Medium gel time. Low exotherm. Low shrinkage. MEKP required (sold separately).

107.99

Each

Quantity:

This resin was designed for mass casting applications where the volume of the project needs to be stress free and crack resistant. This water clear casting resin meets the need where the low exotherm and long gel times are required to provide successful results. The ideal working temperature is at 77°F. Best results for this product can be obtained at temperatures between 70°F and 85°F, in a clean, dry, dust-free environment. FGCI’s Clear Casting Resin is a polyester resin for ambient temperature cure with MEK-P. It is used to produce medium to large size castings with great clarity. FGCI’s Clear Casting Resin was designed to reduce the appearance of cracks in larger castings with a long cure time, low peak exotherm, and minimal shrinkage. If sanding is required, use 320 grit. Be sure to clean the surface before applying any additional layers.