S2K Commerce - Products Dropdown
Actions
- ${title}
Loading...
S2K Commerce - Shopping Cart
Actions
- ${title}
Loading...
My Cart
Items
0
S2K Commerce - Order Entry
Actions
- ${title}
Loading...
Home
>
Resins, Polyester & Vinylester & Epoxy
> Superbond Epoxy, Fast, Curing Agent, EA-089B3, 1/2 Pint Tub
Superbond Epoxy, Fast, Curing Agent, EA-089B3, 1/2 Pint Tub
Item #:125299
Superbond Epoxy 1:1 Adhesive, ½ Pint. Fast Activator. Standard Cure Time. 100% solids. Designed for bonding, fitting & fairing of substrates (wood, metal, glass & plastics). Est. Pot Life: 8-10 Mins. @ 77F 1/2 lb. mass. Base is requiRed.
FGCI Superbond Epoxy Adhesive is a two-component, 100% solid system designed for adhesive bonding and the fitting and fairing of a wide variety of substrates.
The material features a highly thixotropic, paste-like consistency, which hangs well in thick sections on vertical and overhead surfaces.
The material cures to a hard, blush-free, amber- colored, high-strength, moisture-resistant plastic with excellent adhesive properties.
Additional recoating of this material should be done before the material is thoroughly cured.
If the material has cured hard and tack-free, a light sanding and solvent wash is advisable before recoating.
Epoxy cures faster at higher temperatures and in thicker layered applications.
Directions for Use:
Step 1: Required prep will vary according to application surface:
Ceramics, Composites, Plastics & Wood Must be oil free and sanded 80 grit or rougher.
Glass Must be sanded with 220 grit or lower until shine is removed.
Metals All metals must be carefully degreased with trisodium phosphate (TSP). Depending on the type of metal, prep work may vary.
Step 2: Be sure to clean the application site, removing all dust and debris.
Step 3: FGCIs Superbond Base Resin may be used with any of the three Activators, which differ in curing time:
Standard Activator
Medium Activator
Fast Activator
Please refer to Properties Chart for gel time.
Step 4: Mix at a 1:1 ratio by volume or weight, equal parts Base and Activator.
Step 5: Stir thoroughly, being sure to scrape sides and bottom of container. For best results, do not mix more than a quart at a time.
The material features a highly thixotropic, paste-like consistency, which hangs well in thick sections on vertical and overhead surfaces.
The material cures to a hard, blush-free, amber- colored, high-strength, moisture-resistant plastic with excellent adhesive properties.
Additional recoating of this material should be done before the material is thoroughly cured.
If the material has cured hard and tack-free, a light sanding and solvent wash is advisable before recoating.
Epoxy cures faster at higher temperatures and in thicker layered applications.
Directions for Use:
Step 1: Required prep will vary according to application surface:
Ceramics, Composites, Plastics & Wood Must be oil free and sanded 80 grit or rougher.
Glass Must be sanded with 220 grit or lower until shine is removed.
Metals All metals must be carefully degreased with trisodium phosphate (TSP). Depending on the type of metal, prep work may vary.
Step 2: Be sure to clean the application site, removing all dust and debris.
Step 3: FGCIs Superbond Base Resin may be used with any of the three Activators, which differ in curing time:
Standard Activator
Medium Activator
Fast Activator
Please refer to Properties Chart for gel time.
Step 4: Mix at a 1:1 ratio by volume or weight, equal parts Base and Activator.
Step 5: Stir thoroughly, being sure to scrape sides and bottom of container. For best results, do not mix more than a quart at a time.
Resins, Polyester & Vinylester & Epoxy
Size
1/2 pint
Brand
Epoxy
Ground Shipping Only
Superbond Epoxy, Resin, EA-089A, 1/2 Pint Tub (65604079)
Superbond Epoxy 1:1 Adhesive, ½ Pint. Base Resin. 100% Solids. Designed for bonding, fitting & fairing of substrates (wood, metal, glass & plastics). Use standard, medium or fast activator to vary pot life.