S2K Commerce - Products Dropdown
ActionsS2K Commerce - Order Entry
ActionsNon-Corrosive Epoxy, Curing Agent, 3:1 Ratio, EA-683B, Gallon Jug
Our 3 to 1 Epoxy Activator forms an
easy to use 2 component 100 % solids epoxy system when mixed with either of our
available epoxy resins in a ratio of three parts Resin ( A side ) to one part
Activator (B side ) by volume. It Is significantly faster setting then our 2 to
1 system with improved chemical and solvent resistance and generally improved
physical properties. When mixed with our Standard Epoxy Resin it forms a
thicker high viscosity system more suited to adhesive bonding and casting
applications as it will generally form a tougher stronger plastic with better
adhesion and very good resistance to hydrocarbon fuels and ethanol. When used
with our Laminating Epoxy Resin it will form a thinner liquid more appropriate
for wetting out fiberglass and other reinforcements it will have a slightly
longer Gel Time and form a plastic with more flexibility, slightly less solvent
resistance and lower HDT. Both systems cure to a tough, hard, blush free, amber
colored plastic, with good physical properties, chemical and solvent
resistance, excellent resistance to water and good adhesion to wood, glass,
metals, and most other plastics.
As with all adhesive compounds bonding surfaces should be
clean and free dirt or grease.